Selecting video sources, Controlling the main camera, Moving / zooming camera – TANDBERG D12155-10 User Manual
Page 32: Focusing camera
32
TANDBERG Videoconferencing System
General use
doc cam
main cam
vcr
pc
aux
OK
zoom
Controlling the Main Camera
Moving / zooming camera
To control the Main Camera use the keys below:
for pan/tilt and
for zooming.
I
F
THE
MENU
SYSTEM
IS
ACTIVE
,
THE
ARROW
KEYS
WILL
NAVIGATE
IN
THE
MENUS
.
Focusing camera
The Main Camera is set to autofocus by default. If the Main Camera is moved (pan/tilt/zoom), autofocus will be
switched On automatically for 5 seconds.
To manually focus the Main Camera, see ‘Video Settings’ in ‘Advanced use’.
When Sleep Mode is selected, the following quick-keys are displayed:
Pressing ‘Sleep Now’ puts the monitors in sleep mode. The system will still accept incoming calls.
Pressing ‘60 Minutes’ or ‘3 Hours’ will delay entering sleep mode accordingly.
Pressing any key or picking up the remote control will deactivate Do Not Disturb/Sleep Mode.
Selecting video sources
Press: to select the video source to be transmitted to the far end.
NOTE
W
HEN
SELECTING
THE
DOC
CAM
OR
PC
VIDEO
SOURCES
THE
SYSTEM
WILL
AUTOMATICALLY
REQUEST
FLOOR
WHEN
CONNECTED
TO
A
MCU
CONFERENCE
AS
M
ULTI
S
ITE
HOST
OR
CONNECTED
TO
AN
EXTERNAL
MCU. T
HIS
FEATURE
CAN
BE
SWITCHED
OFF
IN
THE
P
RESENTATIONS
MENU
.
NOTE