TANDBERG D12155-10 - Manual (Page 38)

38
TANDBERG Videoconferencing System General use
End a Duo Video call
To end a Duo Video call, press D
ISCONNECT
. Select if you want to disconnect only the Duo Video
connection or the whole connection.
disconnect
Controlling camera, changing video source, presets in a Duo Video call
The main monitor will always display incoming video. The 2nd monitor will display outgoing video (Duo Video in full
screen / Main local video in PIP).
Pressing S ELFVIEW will toggle Duo Video full screen / Main source in PIP and vice versa. Pressing S ELFVIEW will
not change anything on the main monitor in a dual monitor setup.
Pressing M
OVE
PIP will move PIP only on the 2nd monitor in a dual monitor setup.
Controlling the camera, changing video source and using presets will affect the video source currently displayed in
full screen mode.
E XAMPLE : I F D UO V IDEO IS SHOWN IN FULL SCREEN ON THE 2 ND MONITOR , PRESSING ANY OF THE VIDEO SOURCE BUTTONS WILL CHANGE D UO
V
IDEO SOURCE
. I
F THE MAIN CONNECTION IS SHOWN IN FULL SCREEN
,
PRESSING ANY OF THE VIDEO SOURCE BUTTONS WILL CHANGE THE MAIN
CONNECTION SOURCE .
If both connections are selected to display the same video source, Duo Video will be closed.