TANDBERG D12155-10 - Manual (Page 96)

96
TANDBERG Videoconferencing System Peripherals
Dual Monitor
It is possible to install the system in a Dual Monitor configuration.
The Dual Monitor option consists of an additional monitor,
bigger cabinet top-plate and associated cabling.
The Dual Monitor can be used to show full screen selfview,
snapshots and Duo Video.
To use the system in the Dual Monitor configuration:
• Connect ‘Video Out 2’ (preferably) otherwise 4 on the
system to a video input on the dual monitor.
• Set ‘Dual Monitor: On’ in ‘Utilities’ menu.
Alternatively you can use a PC monitor as your second
monitor:
• Connect ‘VGA Out’ on the system to your PC monitor.
• Set ‘VGA Out: Dual’ in ‘VGA Settings’ menu.
XGA monitor*
The TANDBERG 2500 can be delivered with XGA monitors as an option. This will allow you to display XGA images
on your Dual Monitor.
• Connect ‘VGA Out’ on the system to your XGA monitor.
• Set ‘VGA Out: Dual’ in ‘VGA Settings’ menu.
• Connect the control cable from Dataport1 to the control input on the XGA monitor. The system will select video
input or XGA input based on signals sent from the system.
I T IS NOT POSSIBLE TO USE T.120 IF THE XGA CONTROL CABLE IS CONNECTED SINCE D ATAPORT 1 IS OCCUPIED . NOTE
* - Optional