Texas Instruments TITANIUM TI-89 - Manual (Page 663)

Text Editor 663
The command is copied to the entry line on the Home screen and executed. The Home
screen is displayed temporarily during execution, and then the Text Editor is redisplayed.
After execution, the cursor moves to the next line in the script so that you can continue to
execute a series of commands.
Note: To examine the result on the Home screen, use a split screen or press @ "
Splitting the Text Editor/ Home Screen Splitting the Text Editor/ Home Screen Splitting the Text Editor/ Home Screen Splitting the Text Editor/ Home Screen
With a split screen, you can view your command script and see the result of an executed
command at the same time.
You can also use 3 to set up a split screen manually. However, … sets up a Text
Editor/Home screen split much easier than 3.
• The active application is indicated by a thick border. (By default, the Text Editor is
the active application.)
• To switch between the Text Editor and the Home screen, press 2 a (second
function of O).
To: Press:
Split the screen …
and select
1:Script view.
Return to a full screen
Text Editor …
and select
2:Clear split.