Tally Genicom 2900 User Manual
Page 12
1–12
Operator Manual
DO NOT power up your printer before removing the shipping
hardware.
CAREFUL!
Unpacking your printer
Instructions for unpacking your printer are located on the outside of the
shipping container. After you have removed your printer from its container,
store the shipping materials for possible later use.
Repacking
Repacking your printer for storage or shipping is the reverse order of
unpacking. If shipping materials are needed, you can reorder them from your
dealer.
Removing the Shipping Hardware
The Shipping Hardware consists of 4 screws, identified by red tags, that secure
the printer base to the inside mechanism, and tie restraints that secure the
Paper Stacking Chains. The shipping screws fasten from underneath, 2 near the
front of the print cabinet and 2 near the rear of the cabinet.
Figure 1 - 1. Shipping Screw Locations
Unpacking the Printer
Arrows point to shipping
screw locations