Tally Genicom 2900 - Manual (Page 78)

B–78 Operator Manual
Physical Configurations
Weight
115.4 lbs.
Dimensions
Width: 28.3 inches
Height: 13.0 inches
Depth: 14.4 inches
Depth with paper exit guide assembly: 23.4 inches
Preventive Maintenance
This printer is designed to eliminate the requirement of scheduled mainte-
nance procedures, such as alignment, adjustment, or lubrication. Preventive
maintenance is limited to periodic cleaning. Dust and paper fibers should be
removed periodically with a soft cloth and brush or a vacuum cleaner. Clean
the printer case with a damp cloth and soapy water. DO NOT use any abrasive
cleaners or solvents, as they will damage the case.
Environment
Operating
Temperature (Dry Bulb): 50°F to 104°F (10°C to 40°C)
Humidity: 10 to 90% noncondensing with a maximum wet bulb
temperature of 82°F (28°C) and a minimum dew point of
36°F (2°C )
Altitude: To 8,000 ft. (2438 meters)
Nonoperating
Temperature:
Boxed: -40°F to 151°F (-40°C to 66°C)
Unboxed: 14°F to 122°F (-10°C to 50°C)
Humidity: 10 to 95% noncondensing
Altitude: To 10,000 ft. (3048 meters)
Thermal Shock: 61°F (20°C) per hour
Vibration: Units meet NSTA (National Safe Transit Association)
requirements.
Safety
Personnel hazard areas have restricted access with appropriate warning labels.
Catastrophic equipment failures are inhibited with protective functions in
major areas of overload potential.
Industry and Agency Standards