Tally Genicom 2900 - Manual (Page 21)

Chapter 2: Loading Paper and Printing 2–21
Introduction
This chapter covers how to load the paper and to set the print gap. It also covers
how to create saveable configuration settings for your own pre-printed forms.
Your printer is designed to use a continuous sheet, sprocket-fed paper. It can
handle:
• Six-part forms (1 original and 5 copies) with a maximum thickness of
.025" (0.6 mm).
• Page widths of 2.5" to 18" (6.4 cm to 45.7 cm).
Specific requirements for pre-printed forms are in Appendix C: Specifications.
Chapter 2