Tally Genicom 2900 - Manual (Page 40)

3–40 Operator Manual
Operator Menu
⇒
Font
Operator Menu
1. Toggle the Online key once or twice to clear the display and put the
printer Offline. Offline should be displayed and the green light should
be off.
2. Press the Menu key.
3. Use the Up or Down arrow keys until you see Operator Menu on the
display.
4. Press Enter.
5. Use one of the arrow keys until the desired category appears; press the
Menu key if you need to back up a level.
Font Category
This category contains parameters that
control how print looks on a page and
the display language. Use the Arrow and
Enter keys to select Menu => Operator
Menu => Font to get here. They are as
follows:
Ser/Par Language
This parameter allows you to select the language used by emulations attached to
the Parallel, Serial, and LAN ports. The language selection defines the charac-
ter substitutions in Hex locations 23, 24, 40, 5B, 5C, 5D, 5E, 60, 7B, 7C, 7D, and
7E. The default is US.
The details of the character substitutions can be found in the Line Printer
Applications Manual. The possible options are:
US German Norwegian/Dan
French UK Spanish
Swedish/Finish Italian Japanese
Portuguese Canadian Hungarian
Chinese French T6 Swedish T6
Italian T6 Canadian Alt Swedish Basic
French Withdrawn Nor/Dan T6 UK LG
Dutch LG Finnish LG Swiss LG
JIS Roman LG Nor/Dan LG Swedish LG
ISO Nor/Dan LG Portuguese LG VT 100
Turkish LG Cro-ASCII Nor/Dan Epson
French Epson UK Epson Spanish Epson
Italian Epson Norwegian Epson Danish Epson
Spanish 2 Epson Lat Amer Epson IRV