Tally Genicom 2900 - Manual (Page 38)

3–38 Operator Manual
Example: Changing Form Length Using the Menu System
If you wanted to change the Form Length from the default of 66 lines to 65
lines, this is how you do it:
1. Make sure your printer is in an Offline state. If it's not, toggle the
Online key.
2. Press the Menu key. The display reads:
3. Press Enter to select the Operator menu and press the down arrow key
until you see Forms. The display reads:
4. Press the Enter key to select Forms. Press the down arrow key until the
display reads Length (lines):
5. Forms Length (lines) is the selection you want, so press the Enter key.
The display reads:
(The asterisk means that 66 is the current selection, see page 3-42.)
6. You want to change this to 65. Press the Down arrow once and the
display reads:
Changing Form Length