Tally Genicom 2900 User Manual
Page 30
3–30
Operator Manual
Control Panel Display
The Display During Normal Operation
During normal operation, the top line of the display indicates the current state
of the printer, such as Online, Offline, or a fault message.
The second line of the display will indicate which of 10 saved configurations is
currently loaded. Each of the configurations can be assigned a unique name
and any of the configurations can be designated as the power up configuration.
By default, this line will display Config 1.
Figure 3 - 1. Control Panel Display for Normal Operation
Paper Weight &
Hammer Impact
Current State
Current Configuration
Current State
The printer is “online” and the green light is on.
Current Configuration
This is the set of parameters, as detailed in the rest of this chapter, that have
been saved in Configuration 1. The asterisk indicates that Configuration 1 is
selected.
Paper Weight & Hammer Impact
The lack of a symbol here means the hammer impact is set to “Normal” and the
paper weight is set to “Light”. See Table 3-1.
Green light is on