Technicolor - Thomson VMD 22 - Manual (Page 23)

22
EN
Progressive Mode Recording
This mode lets you record moving images (successive
jitter-free still images) onto a tape. Images can then played
back jitter-free, with superior quality. High-resolution still
images can also be processed on a personal computer or
can be printed out (
੬
pg. 59).
1 Set the MODE Dial to “ ”, then set the POWER
Switch to “ ” while pressing down the Lock
Button located on the switch. Pull out the viewfinder
fully or open the LCD monitor fully.
2 To start Progressive Mode Recording, press START/
STOP.
To End Progressive Mode Recording . . .
.... press START/STOP. The camcorder enters the Record-
Standby mode.
NOTES:
● When an image recorded using the Progressive Mode is
played back, the image may not look natural.
● When the MODE Dial is set to “ ”, Picture Wipe/
Dissolve (
੬
pg. 34) and some Programme AE with
special effects (
੬
pg. 36) cannot be used.
● If SNAPSHOT is pressed in the PS mode, a snapshot will
be recorded with higher quality than in VIDEO mode.
(
੬
pg. 18).
SNAPSHOT Button
START/STOP Button
Lock Button
RECORDING Advanced Features For Video And D.S.C.
MODE Dial
POWER Switch
VMD22 EN(02/33) 29/08/00, 14:41 22