Technicolor - Thomson VMD 22 - Manual (Page 62)

E N
6 1
VCR
TV
* Connect when an S-Video cable is not used.
POWER Switch
To S
S-Video
cable
(optional)
Red to
AUDIO R Yellow to
VIDEO*
White to
AUDIO L
Audio/Video cable
[RCA plug to RCA
plug] (optional)
Lock Button
Core filter
Dubbing From A VCR
[To use this camcorder as a recorder]
1 Make sure all units are turned off, then connect the
camcorder and the VCR as shown in the illustration.
Also refer to pg. 56 and 57.
2 Set “SOUND MODE” to “12 BIT” or “16 BIT” and
“REC MODE” to “SP” or “LP” in the Menu Screen
depending on your preference (
੬
pg. 11, 26, 27).
3 Set the camcorder’s POWER Switch to “ ”
while pressing down the Lock Button located on the
switch. Turn on the VCR’s power and insert the
appropriate cassettes in the camcorder and the VCR.
4 Set “AV/S-VIDEO” to “IN” in the Menu Screen to
engage the analogue input mode (
੬
pg. 41).
5 Press START/STOP on the camcorder to engage the
Record-Pause mode. “AV. IN” appears on the screen.
6 Engage the VCR’s Play mode, then engage the Still
Playback mode when you have found a spot just
before the edit-in point.
7 Press START/STOP on the camcorder to engage the
Record mode. “
AV. IN ” appears on the screen.
Engage the VCR’s Play mode.
8 To stop dubbing, press START/STOP on the
camcorder so that “AV. IN” reappears, then engage
the VCR’s Stop mode.
9 Repeat steps 6 through 8 for additional editing.
10
Set “AV/S-VIDEO” back to “OUT” in the Menu
Screen to disengage the analogue input mode
(
੬
pg. 41).
NOTES:
● When connecting the cables, make sure to connect the
ends with a core filter to the camcorder. The core filter
reduces interference.
● To use an output cable adapter (commercially avail-
able), refer to its instructions.
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack
(
੬
pg. 7).
● Analogue signals can be converted to digital signals with
this procedure.
● It is also possible to dub from another camcorder.
Cable Adapter
(not provided)
If your VCR has a
SCART connector,
use a commercially
available output
cable adapter.
To Audio, Video*
and S-Video
connectors
VMD22 EN(34/65) 29/08/00, 15:16 61