TOYOTA EPS9000 - Manual (Page 23)

PREP
ARAT
IO
N
23
ATTACHING THE TABLE
1. Push in the table (1) till it hits the bottom with care to maintain equally at both right and left of top of the base cover
(2) on the embroidery machine.
2. Tighten the right and left fixing screws (3). This completes the attaching of the table.
DIP SWITCH SETTING
Set DSW1-2 at ON to change the LCD indicator on the operation panel box to the display in Japanese.
Fixing screw (3)
Base
Base cover (2)
Table (1)
Fixing screw (3)