TOYOTA EPS9000 - Manual (Page 84)

OP
ERAT
ION
PROCED
URE
84
SATIN ADJUSTMENT
This function expands satin stitch width.
To expand satin stitch width, set an adjustment value for "SATIN ADJ." of
FUNCTION MENU.
Setting: OFF, 1 to 5 (+0.1 to +0.5 mm)
If "2" is set, +0.2 mm is added on both sides of the normal satin stitch width.
Satin stitch adjustment is made according to the set adjustment value for stitch
width of 1.5 mm or larger. For satin stitch width less than this limit, satin stitch width
is adjusted with a value smaller than the set value.
By changing the setting of DIP switch (DSW2-4) at the operation panel, this limit
width can be changed so that satin stitch adjustment is possible for 0.6 mm or
larger stitch width.
FD07
Normal satin
stitch width
Adjustment
value
Adjustment
value