TOYOTA EPS9000 - Manual (Page 55)

55
OPERAT
ION
PROCED
URE
MIRROR
Sets the axis of symmetry for reversing the design data.
1 Change the display to EDIT MENU.
2 Select "2. MIRROR" (reversal of design data).
3 Select the axis as the base line for reversing the design data.
Data is reversed symmetrically
around the X-/Y-axis.
4 Press [SET] to confirm the selection.
To edit the design data continu-
ously, move the cursor to
"ROTATE" or "REPEAT" using
(hoop travel key) and input the
data for "ROTATE" or "REPEAT"
before pressing the SET key.
5 End of operation
FD07
* * * * * E M B S T A R T * * * *
A I S I N 1 2 3 . 1 0 O 1
0 / 1 0 2 7
0 1 / 1 5 : 2 3 4 5 6 7 8 9 A B < D >
1
Press .
For details of mirror, refer to
Page 80.
* * * * * E D I T M E N U * * * *
1 R O T A T E 0
2 . M I R R O R O F F
3 . R E P E A T [ S E T ]
.
Move the cursor using (hoop
travel key).
Select "OFF", "X", "Y" or "XY" using
the following keys:
and (hoop travel keys)
* * * * * E D I T M E N U * * * *
1 . R O T A T E 0
2 M I R R O R O F F
3 . R E P E A T [ S E T ]
.
X
Y
Reversal around
the Y-axis
Reversal
around the X-axis
* * * * * E D I T M E N U * * * *
1 . R O T A T E 0
2 M I R R O R Y
3 . R E P E A T [ S E T ]
.
Press .
* * * * * E M B S T A R T * * * *
A I S I N 1 2 3 . 1 0 O 1
0 / 1 0 2 7
0 1 / 1 5 : 2 3 4 5 6 7 8 9 A B < D >
1