Document Outline

• 1 SAFETY CONVENTIONS
• 2 SAFETY TRAINING INFORMATION
  • 2.1 RF EXPOSURE GUIDELINES
  • 2.2 ELECTROMAGNETIC INTERFERENCE/COMPATIBILITY
• 3 OPERATING TIPS
  • 3.1 EFFICIENT RADIO OPERATION
    • 3.1.1 Antenna Care and Replacement
    • 3.1.2 Electronic Devices
    • 3.1.3 Aircraft
    • 3.1.4 Electric Blasting Caps
    • 3.1.5 Potentially Explosive Atmospheres
• 4 BATTERIES
  • 4.1 CONDITIONING BATTERY PACKS
    • 4.1.1 Conditioning NiMH battery packs
    • 4.1.2 Conditioning NiCD Battery Packs
    • 4.1.3 Additional Information
  • 4.2 CHARGING BATTERY PACKS
    • 4.2.1 Charging Guidelines
  • 4.3 BATTERY PACK USAGE
    • 4.3.1 Usage Guidelines
  • 4.4 CHANGING THE BATTERY PACK
    • 4.4.1 Removing the Battery Pack
    • 4.4.2 Attaching the Battery Pack
  • 4.5 BATTERY DISPOSAL
• 5 INTRODUCTION
  • 5.1 WATER RESISTANCE
  • 5.2 UNIVERSAL DEVICE CONNECTOR (UDC)
• 6 OPTIONS AND ACCESSORIES
• 7 OPENSKY OPERATION
  • 7.1 POWER ON/OFF AND VOLUME CONTROL
    • 7.1.1 Power ON/OFF
    • 7.1.2 Volume Control
  • 7.2 CONTROLS
    • 7.2.1 Buttons and Knobs
    • 7.2.2 Keypad (P7250 and P7270 Only)
  • 7.3 DISPLAY
  • 7.4 RADIO STATUS ICONS
  • 7.5 TRI-COLOR LED
  • 7.6 LOG IN TO THE NETWORK
  • 7.7 LOG OFF THE NETWORK
  • 7.8 PERSONALITY
    • 7.8.1 Profiles
    • 7.8.2 Talk Groups
  • 7.9 OPENSKY DISPLAY OVERVIEW
    • 7.9.1 Display’s Top Line
    • 7.9.2 Display’s Second Line
    • 7.9.3 Dwell Display
  • 7.10 ALERT TONES
  • 7.11 BASIC MENU STRUCTURE
  • 7.12 KEYPAD FUNCTION COMMANDS (P7270 ONLY)
  • 7.13 CHANGING THE ACTIVE PROFILE
  • 7.14 CHANGING THE SELECTED TALK GROUP
  • 7.15 ADJUSTING DISPLAY & BUTTON BACKLIGHT BRIGHTNESS
  • 7.16 STEALTH MODE
    • 7.16.1 Enabling Stealth Mode
    • 7.16.2 Disabling Stealth Mode
  • 7.17 ADJUSTING SIDE TONE AUDIO LEVEL
  • 7.18 CHANGE OPERATING MODE
  • 7.19 RECEIVING AND TRANSMITTING VOICE CALLS
    • 7.19.1 Receiving a Voice Call
    • 7.19.2 Transmitting a Voice Call
  • 7.20 ADJUSTING AUDIO TREBLE LEVEL
  • 7.21 TALK GROUP LOCK OUT
    • 7.21.1 Lock Out a Talk Group
    • 7.21.2 Unlock a Talk Group
  • 7.22 SCANNING
    • 7.22.1 Selecting Scan Modes
    • 7.22.2 Checking or Changing Active Scan Mode
      • 7.22.2.1 Setting the Scan Mode
      • 7.22.2.2 Duration of Scanning Mode Selections
    • 7.22.3 Scanning Priority
      • 7.22.3.1 Changing Scan Priority
  • 7.23 MAKING SELECTIVE CALLS
    • 7.23.1 Manually Dialing a Selective Call (P7270 Only)
    • 7.23.2 Selective Call Using Speed Dial
    • 7.23.3 Accepting a Selective Call
    • 7.23.4 Rejecting a Selective Call
    • 7.23.5 Terminating a Selective Call
  • 7.24 SELECTIVE ALERTS
    • 7.24.1 Defining Messages
    • 7.24.2 Sending a Message
      • 7.24.2.1 Selecting a Destination Using the Keypad (P7270 Only)
      • 7.24.2.2 Selecting a Destination Using the Menu:
    • 7.24.3 Receiving a Message
    • 7.24.4 Deleting a Selective Alert Message:
  • 7.25 MAKING INTERCONNECT CALLS (P7270 ONLY)
  • 7.26 EMERGENCY COMMUNICATIONS
    • 7.26.1 Declaring an Emergency Call or Alert
    • 7.26.2 Receiving an Emergency Call
    • 7.26.3 Dismissing an Emergency
    • 7.26.4 Clearing an Emergency Call or Alert
  • 7.27 OPENSKY ENCRYPTION
    • 7.27.1 Automatic Encryption
      • 7.27.1.1 Using Automatic Encryption
    • 7.27.2 Manual Encryption (P7270 Only)
      • 7.27.2.1 Using Manual Encryption
  • 7.28 DYNAMIC REGROUPING
  • 7.29 GPS COORDINATES
• 8 EDACS OPERATION
  • 8.1 TURNING ON THE RADIO
  • 8.2 CONTROLS
    • 8.2.1 Buttons and Knobs
    • 8.2.2 Keypad (P7250 “Scan” and P7270 “System” Models Only)
  • 8.3 DISPLAY
  • 8.4 RADIO STATUS ICONS
  • 8.5 TRI-COLOR LED
  • 8.6 STATUS MESSAGES
  • 8.7 ERROR MESSAGES
  • 8.8 ALERT TONES
  • 8.9 SYSTEM SELECTION
  • 8.10 GROUP/CHANNEL SELECTION
  • 8.11 MODIFY SCAN LIST
    • 8.11.1 System Model
    • 8.11.2 Scan Model
  • 8.12 NUISANCE DELETE (SYSTEM MODEL)
  • 8.13 BACKLIGHT ON/OFF
  • 8.14 CONTRAST ADJUST
  • 8.15 DECLARING AN EMERGENCY
  • 8.16 LOCKING/UNLOCKING KEYPAD
  • 8.17 HIGH/LOW POWER ADJUSTMENT
    • 8.17.1 Using the Menu Button
    • 8.17.2 Using the Pre-Programmed Option Button
  • 8.18 MENU
    • 8.18.1 Menu Item Selection Process
  • 8.19 DIGITAL VOICE OPERATION
    • 8.19.1 Clear Mode
    • 8.19.2 Digital Mode
    • 8.19.3 Private Mode
      • 8.19.3.1 Displaying the Currently Used Cryptographic Key Number
      • 8.19.3.2 Key Zero
    • 8.19.4 Private Operation
      • 8.19.4.1 Receiving an Encrypted Call
      • 8.19.4.2 Transmitting an Encrypted Call
      • 8.19.4.3 Scanned Group Calls
  • 8.20 SCANNING TRUNKED GROUPS
    • 8.20.1 Turning Scan On and Off
    • 8.20.2 Adding Groups to a Scan List
    • 8.20.3 Deleting Groups from a Scan List
    • 8.20.4 Nuisance Delete
  • 8.21 SCANNING TRUNKED SYSTEMS
    • 8.21.1 Wide Area System Scanning
    • 8.21.2 Priority System Scan
      • 8.21.2.1 Enabling the Wide Area System Scan Function
      • 8.21.2.2 When ProScan is Enabled
    • 8.21.3 ProScan
  • 8.22 EMERGENCY OPERATION
    • 8.22.1 Receiving an Emergency Call
    • 8.22.2 Declaring an Emergency Call
  • 8.23 INDIVIDUAL CALLS
    • 8.23.1 Receiving and Responding to an Individual Call
    • 8.23.2 Sending an Individual Call
      • 8.23.2.1 Pre-Stored Individual Calls
      • 8.23.2.2 Direct Dial Individual Calls (System Model Only)
    • 8.23.3 Call Storage Lists
  • 8.24 TELEPHONE INTERCONNECT CALLS
    • 8.24.1 Receiving a Telephone Interconnect Call
    • 8.24.2 Sending a Telephone Interconnect Call
      • 8.24.2.1 Pre-Stored Number
    • 8.24.3 Dual-Tone Multi-Frequency: Overdial/Conventional Mode
  • 8.25 PROGRAMMABLE ENTRIES
    • 8.25.1 Pre-Storing Individual and Telephone Interconnect Calls from the Keypad
  • 8.26 STATUS/MESSAGE OPERATION
    • 8.26.1 Status Operation
    • 8.26.2 Message Operation
  • 8.27 DYNAMIC REGROUP OPERATION
    • 8.27.1 Emergency Operation
  • 8.28 MACRO KEY OPERATION
  • 8.29 PORTABLE DATA
    • 8.29.1 Displays
    • 8.29.2 DATA OFF Operation
    • 8.29.3 DATA ON Operation
    • 8.29.4 Exiting Data Calls
    • 8.29.5 Scan Lockout Mode
    • 8.29.6 Data Lockout Mode
• 9 PROJECT 25 (P25) CONVENTIONAL OPERATION
  • 9.1 TURNING ON THE RADIO
  • 9.2 CONTROLS
    • 9.2.1 Buttons and Knobs
    • 9.2.2 Keypad (P7250 “Scan” and P7270 “System” Models Only)
  • 9.3 DISPLAY
    • 9.3.1 Radio Status Icons
  • 9.4 TRI-COLOR LED
  • 9.5 STATUS MESSAGES
    • 9.5.1 Error Messages
  • 9.6 ALERT TONES
  • 9.7 SYSTEM SELECTION
  • 9.8 GROUP/CHANNEL SELECTION
  • 9.9 MODIFY SCAN LIST
    • 9.9.1 P7270 System Model
    • 9.9.2 P7250 Scan Model
  • 9.10 NUISANCE DELETE (SYSTEM MODEL)
  • 9.11 BACKLIGHT ON/OFF
  • 9.12 CONTRAST ADJUST
  • 9.13 DECLARING AN EMERGENCY
  • 9.14 LOCKING/UNLOCKING KEYPAD
  • 9.15 HIGH/LOW POWER ADJUSTMENT
    • 9.15.1 Using the Menu Button
    • 9.15.2 Using the Pre-Programmed Option Button
  • 9.16 MENU
    • 9.16.1 Menu Item Selection Process
  • 9.17 DIGITAL VOICE OPERATION
    • 9.17.1 Clear Mode
    • 9.17.2 Digital Mode
    • 9.17.3 Private Mode
      • 9.17.3.1 Displaying the Currently Used Cryptographic Key Number
      • 9.17.3.2 Key Zero
    • 9.17.4 Private Operation
      • 9.17.4.1 Receiving an Encrypted Call
      • 9.17.4.2 Transmitting an Encrypted Call
      • 9.17.4.3 Scanned Group Calls
  • 9.18 GROUP CALLS IN P25 MODE
    • 9.18.1 Transmitting a Group Call
    • 9.18.2 Receiving a Group Call
  • 9.19 INDIVIDUAL CALLS IN P25 MODE
    • 9.19.1 Transmitting an Individual Call
    • 9.19.2 Receiving an Individual Call
  • 9.20 EMERGENCY GROUP CALLS IN P25 MODE
    • 9.20.1 Declaring an Emergency Group Call
    • 9.20.2 Receiving an Emergency Group Call
• 10 CONVENTIONAL OPERATION
  • 10.1 CONTROLS
    • 10.1.1 Buttons and Knobs
    • 10.1.2 Keypad (P7250 “Scan” and P7270 “System” Models Only)
  • 10.2 DISPLAY
    • 10.2.1 Radio Status Icons
  • 10.3 TRI-COLOR LED
  • 10.4 STATUS MESSAGES
    • 10.4.1 Error Messages
  • 10.5 ALERT TONES
  • 10.6 TURNING ON THE RADIO
  • 10.7 SYSTEM SELECTION
  • 10.8 GROUP/CHANNEL SELECTION
  • 10.9 MODIFY SCAN LIST
    • 10.9.1 System Model
    • 10.9.2 Scan Model
  • 10.10 NUISANCE DELETE (SYSTEM MODEL)
  • 10.11 BACKLIGHT ON/OFF
  • 10.12 CONTRAST ADJUST
  • 10.13 DECLARING AN EMERGENCY
  • 10.14 LOCKING/UNLOCKING KEYPAD
  • 10.15 HIGH/LOW POWER ADJUSTMENT
    • 10.15.1 Using the Menu Button
    • 10.15.2 Using the Pre-Programmed Option Button
  • 10.16 MENU
    • 10.16.1 Menu Item Selection Process
  • 10.17 DIGITAL VOICE OPERATION
    • 10.17.1 Clear Mode
    • 10.17.2 Digital Mode
    • 10.17.3 Private Mode
      • 10.17.3.1 Displaying the Currently Used Cryptographic Key Number
      • 10.17.3.2 Key Zero
    • 10.17.4 Private Operation
      • 10.17.4.1 Receiving an Encrypted Call
      • 10.17.4.2 Transmitting an Encrypted Call
      • 10.17.4.3 Scanned Group Calls
  • 10.18 RECEIVING A CALL
  • 10.19 SENDING A CALL
• 11 TECHNICAL ASSISTANCE
  • 11.1 IMMERSIBLE P7200
• 12 BASIC TROUBLESHOOTING