TP-Link TL-R4000 - Manual (Page 28)

TL-R4000 Enterprise Broadband Router User Guide
22
When you want to add or modify a Address Reservation, you can click the Add New
button or Modify button, then you will go to the next page. This page is used for adding
or modifying a Address Reservation (shown in Figure 4-18).
Figure 4-18 Add or Modify a Address Reseration Entry
To Reserve IP addresses:
1. Enter the MAC address (The format for the MAC address is XX-XX-XX-XX-XX-XX.)
and IP address in dotted-decimal notation of the computer you wish to add.
2. Click the Save button when finished.
To modify or delete a Reserved IP address:
1. Find the desired entry in the table.
2. Click
Modify or Delete as desired on the Modify column.
Click the Enable All button to make all the entries enabled.
Click the Disable All button to make all the entries disabled.
Click the Delete All button to delete all the entries.
Click the Next button to go to the next page and Click the Previous button to return to
the previous page.
)
Note:
The function won't take effect until the router reboots.
4.6 Forwarding
Figure 4-19 the Forwarding menu
There are four submenus under the Forwarding menu: Virtual Servers, Port Triggering,