TP-Link TL-R4000 - Manual (Page 52)

TL-R4000 Enterprise Broadband Router User Guide
46
Figure 4-50 Restore Factory Default
Click the Restore button to reset all configuration settings to their default values.
• The default User Name: admin
• The default Password: admin
• The default IP Address: 192.168.1.1
• The default Subnet Mask: 255.255.255.0
)
Note:
Any settings you have saved will be lost when the default settings are restored.
4.11.4 Backup & Restore Configuration
This page shown in Figure 4-51 allows you to save and restore all configuration settings
in the router.
Figure 4-51 Backup & Restore Configuration
Click the Backup button to save all configuration settings to your local computer as a file.
To restore the router's configuration, follow these instructions:
• Click the Browse button to find the configuration file which you want to restore.
• Click the Restore button.
)
Note:
The current configuration will be covered with the uploading configuration file. Wrong
process will lead the device unmanaged. The restoring process lasts for 20 seconds and
restart automatically then. Keep the router is on power during restoring process, in case
of any damage.
4.11.5 Reboot
This page shown in Figure 4-52 allows you to reboot the router.