TP-Link TL-R4000 - Manual (Page 46)

TL-R4000 Enterprise Broadband Router User Guide
40
To find an existing entry:
1. Click
the Find button (shown in Figure 4-42).
2. Enter the MAC Address or IP Address.
3. Enter
the Find button in the next page (shown in figure 5-40).
Figure 4-42 Find IP & MAC Binding Entry
Click the Enable All button to make all entries enabled.
Click the Delete All button to delete all entries.
4.9.2 ARP List
To manage the computer, you could observe the computers in the LAN by checking the
relationship of MAC address and IP address on the ARP list, and you could configure
the items on the ARP list also. This page displays the ARP List, it shows all the existing
IP & MAC Binding entries.
Figure 4-43 ARP List
• MAC Address - The MAC address of the controlled computer in the LAN.
• IP Address - The assigned IP address of the controlled computer in the LAN.
• Status - Enabled or Disabled of the MAC address and IP address binding.
• Configure - Load or delete item.