TP-Link TL-R4000 - Manual (Page 44)

TL-R4000 Enterprise Broadband Router User Guide
38
• Destination IP Address - The Destination IP Address is the address of the
network or host that you want to assign to a static route.
• Subnet Mask - The Subnet Mask determines which portion of an IP address is
the network portion, and which portion is the host portion.
• Default Gateway - This is the IP address of the default gateway device that
allows for contact between the router and the network or host.
3. Select the Enabled in the Status pull-down list.
4. Click the Save button to save it.
To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click
Modify or Delete as desired on the Modify column.
Click the Enable All button to make all entries enabled.
Click the Disable All button to make all entries enabled.
Click the Delete All button to delete all entries.
4.9 IP & MAC Binding Setting
Figure 4-39 the IP & MAC Binding menu
There are two submenus under the IP &MAC Binding menu: Binding Setting and ARP
List. Click any of them, and you will be able to scan or configure the corresponding
function. The detailed explanations for each submenu are provided below.
4.9.1 Binding Setting
This page displays the IP & MAC Binding Setting table, you can operate it in accord with
your desire.