TP-Link TL-R4000 - Manual (Page 43)

TL-R4000 Enterprise Broadband Router User Guide
37
¾
Host IP Address - The IP addresses that are blocked by DoS are displayed here.
¾
Host MAC Address - The MAC addresses that are blocked by DoS are displayed
here.
To update this page and to show the current blocked host, click on the Refresh button.
Click the Clear All button to clear all displayed entries. After the table is empty the
blocked host will regain the capability to access the Internet.
Click the Return button to return to the Advanced Security page
4.8 Static Routing
A static route is a pre-determined path that network information must travel to reach a
specific host or network. This page displays the Static Routing table, you can operate it
in accord with your desires.
Figure 4-37 Static Routing
When you want to add or modify a Static Routing, you can click the Add New button or
Modify button, and then you will go to the next page. This page is used for adding or
modifying a Static Routing.
Figure 4-38 Add or Modify a Static Route Entry
To add static routing entries:
1. Click
the Add New.. button.
2. Enter the following data: