TP-Link TL-R4000 - Manual (Page 50)

TL-R4000 Enterprise Broadband Router User Guide
44
4.11 System Tools
Figure 4-47 the System Tools menu
There are eight submenus under the System Tools menu: Time, Firmware, Factory
Defaults, Backup & Restore, Reboot, Password, Log and Statistics. Click any of
them, and you will be able to configure the corresponding function. The detailed
explanations for each submenu are provided below.
4.11.1 Time
You can set the time manually or get GMT from the Internet for the router on this page :
Figure 4-48 Time settings
¾
Time Zone - Select your local time zone from this pull down list.
¾
Date - Enter your local date in MM/DD/YY into the right blanks.
¾
Time - Enter your local time in HH/MM/SS into the right blanks.
Time setting follows these steps below:
1. Select your local time zone.
2. Enter date and time in the right blanks
3. Click
Save.
Click the Get GMT button to get GMT time from Internet if you have connected to the
Internet.
)
Note:
1. This setting will be used for some time-based functions such as firewall. You
must specify your time zone once you login to the router successfully, if not the
time limited on these functions will not take effect.