Uniden NEO TRUC56 - Manual (Page 18)

G E T T I N G S TA R T E D [ 16 ]
Entering Your Area Code
If you enter a 3-digit area code number in the “ Area Code ” option, your local area code
does not appear in Caller ID messages. For calls received from outside your local area code,
you will see a full 10-digit number.
1) When the phone is in the standby mode, press MENU/MUTE .
2) Press UP or DOWN to move the pointer to “ Caller ID
Setup ”, then press SELECT/CH .
3) Press UP or DOWN to move the pointer to “ Area Code ”,
then press SELECT/CH .
4) Use the number keypad ( 0 to 9 ) to enter a 3-digit
area code.
5) Press SELECT/CH , and you will hear a confirmation tone.
6) Press END to exit.
• If your calling area
requires 10-digit
dialing, do not
program this option.
• When the area code
has already been
stored in memory,
the stored area code
will be displayed. To
change it, press
DEL/TRANS and the
number keypad to
enter the new
area code.
TRUC56_OM 12/11/02 9:24 AM Page 16