Uniden NEO TRUC56 - Manual (Page 21)

BASICS
B A S I C S [ 19 ]
Making and Receiving Calls
To make or receive a call, you need to plug in the supplied headset. (See page 18.)
At the start, wear the headset.
Handset On Base Handset Off Base
To answer a call Pick up the handset (AutoTalk) Press any number key, ✱/TONE,
or pick up the handset and or # (Any Key Answer), or
press TALK/FLASH. press TALK/FLASH.
To make a call 1) Pick up the handset. 1) Press TALK/FLASH.
2) Press TALK/FLASH. 2) Listen for the dial tone.
3) Listen for the dial tone. 3) Dial the number.
4) Dial the number.
OR OR
1) Pick up the handset. Dial the number, then
2) Dial the number, then press TALK/FLASH.
press TALK/FLASH.
To hang up Press END, or return the handset to the base (AutoStandby).
To enter a pause When you dial the number, press RDL/P.
within the “ P ” appears in the display which represents a pause.
dialing sequence
Refer to page 15
“Setting Caller ID
Options” to turn the
AutoTalk feature On if
desired. Any key answer
can be used only when
AutoTalk is set to On.
TRUC56_OM 12/11/02 9:25 AM Page 19