Uniden NEO TRUC56 - Manual (Page 42)

C A L L E R I D [ 40 ]
Call Waiting Deluxe Features
• To activate features,
select “ CW Deluxe
On ” in the Caller ID
setup. See page 15.
• You can also answer a
waiting call immediately
by pressing
TALK/FLASH ,
the first caller will be
placed on hold. To return
to the original caller,
press
TALK/FLASH again.
Your TRUc56 series gives you new options for Call Waiting. At the touch of a button, you can
place the caller on hold, send them to your voice mail service, or conference them into your
current call. You may be required to subscribe to Call Waiting and Call Waiting Deluxe to use
these features. Not all features are available in all areas. Check with your local telephone
company for details.
1) When you receive a Call Waiting call, press MENU/MUTE for a list of options.
2) Press UP or DOWN , or the number keypad ( 1 - 7 ) to select an option. For example:
• You cannot store a Caller ID message in the phonebook if a phone number does not appear in the message.
• You cannot set the Distinctive Ring or Speed dial in this step. If you would like to set these options, edit
the stored data.
• Even if the memory locations are full, the message will be stored in the Phonebook, however, the message
will be erased from the Caller ID List.
• If data is already stored in the RocketDial, the old data will be overwritten by the new data.
3) Press SELECT/CH . You will hear a confirmation tone.
Press
DOWN
4 times
Press
DOWN
2 times
3) Press SELECT/CH . A confirmation screen will appear.
Your TRUc56 series is pre-programmed with seven call waiting options. You may select to
ask the calling party to hold, send them a busy message, forward them to your voice mail,
or answer and drop the first caller. You may also select to conference them into the current
call or, at any time, choose to drop the first or drop the last caller.
Check with your local telephone company for a full list of options.
TRUC56_OM 12/11/02 9:26 AM Page 40