Uniden NEO TRUC56 - Manual (Page 27)

BASICS
[ 25 ] B A S I C S
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise
increases. If you pass the range limits of the base unit, your call will terminate
within 30 seconds.
Find Handset
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change
the phone’s channel for clear operation. This function works only when the phone
is in use.
Press SELECT/CH . “ Scanning ” appears on the display, indicating the phone is
changing to another channel. For more information on interference, refer to
“Radio Interference” on page 50.
To locate the handset, press PAGE on the base. The handset
beeps for 60 seconds, and “ Paging ” appears on the display.
Paging is canceled when pressing any key on the handset or
PAGE on the base. Additionally, if you receive an incoming
call, page is canceled.
If the handset battery is
completely drained, the
handset will not beep
when paging.
TRUC56_OM 12/11/02 9:25 AM Page 25