Vivotek NETWORK CAMERA IZ7151 - Manual (Page 31)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 3
port is set to 8080� Also, they can be assigned with another port number between 1025 and 65535�
If the ports are incorrectly assigned, the following warning messages are displayed:
To access the Network Camera within a local area network, both HTTP port and secondary HTTP
port can be used to access the Network Camera� For example, when the HTTP port is set to 80
and the secondary HTTP port is set to 8080, refer to the list below for the Network Camera's IP
address�
In a local area network
http://192�168�4�160 or
http://192�168�4�160:8080
Access name for stream 1 / Access name for stream 2 : The access name is used to differentiate
the streaming source� When using Mozilla Firefox or Netscape to access the Network Camera,
and the video mode is set to JPEG, users will receive continuous JPEG pictures� This technology,
known as "server push", allows the Network Camera to feed live pictures to
Mozilla Firefox and
Netscape
Use http://<ip address>:<http port>/<access name for stream1 or stream2> to make connection.
For example, when the access name for stream 1 is set to video�mjpg:
1
: Launch Mozilla Firefox or Netscape�
2
:
Type the URL command in the address field. Press Enter.
3
: The JPEG images will be displayed in your web browser�
NOTE :
► To utilize the HTTP authentication, make sure that your have set a password for the Network
Camera first; see Security on page  for details.