Vivotek NETWORK CAMERA IZ7151 - Manual (Page 93)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 3
Syntax:
http://<servername>/cgi-bin/dido/setdo.cgi?do1=<state>[&do2=<state>][&do3=<state>][&do4=<state>][&return
=<return page>]
Where state is 0, 1� “0” means inactive or normal state while “1” means active or triggered state�
Parameter Value Description
do<num>
0
1
0 => inactive, normal state
1 => active, triggered state
return
<return page>
Redirect to the page <return page> after the parameter
is assigned. The <return page> can be a full URL path or
relative path according the current path� If you omit this
parameter, it will redirect to an empty page�
Example: Drive the digital output 1 to triggered state and redirect to an empty page
http://myserver/cgi-bin/dido/setdo.cgi?do1=1
Query status of the digital input
Note: This request requires the privilege of viewer�
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/dido/getdi.cgi?[di0][&di1][&di2][&di3]
If no parameter is specified, all the status of digital input will be returned�
Return:
HTTP/1�0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: <length>\r\n
\r\n
[di0=<state>]\r\n
[di1=<state>]\r\n
[di2=<state>]\r\n
[di3=<state>]\r\n
where <state> can be 0 or 1.
Example: Query the status of digital input 1
Request:
http://myserver/cgi-bin/dido/getdi.cgi?di1
Response:
HTTP/1�0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: 7\r\n
\r\n
di1=1\r\n
Query status of the digital output
Note: This request requires the privilege of viewer�
Method: GET/POST
Syntax: