Vivotek NETWORK CAMERA IZ7151 - Manual (Page 86)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
 - User's Manual
enable
<boolean>
6/6 Enable or disable the UPNP presentation service�
Group: upnpportforwarding
Name Value
Security
(get/set)
Description
enable
<boolean>
6/6 Enable or disable the UPNP port forwarding service�
upnpnatstatus 0~3 6/7
The status of UpnP port forwarding, used internally�
0 is OK
1 is FAIL
2 is no IGD router
3 is no need to do port forwarding
Group: syslog
Name Value
Security
(get/set)
Description
enableremotelog
<boolean>
6/6 Enable remote log
serverip
<IP address>
6/6 Log server IP address
serverport 514, 1025~65535 6/6 Server port used for log
level 0~7 6/6
The levels to distinguish the importance of information�
0: LOG_EMERG
1: LOG_ALERT
2: LOG_CRIT
3: LOG_ERR
4: LOG_WARNING
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG
Group: camctrl_c<0~(n-1)> for n channel product
Name Value
Security
(get/set)
Description
panspeed -5 ~ 5 1/4
Pan speed
-5 ~ 5
tiltspeed -5 ~ 5 1/4
Tilt speed
-5 ~ 5
zoomspeed -3 ~ +3 1/4
Zoom speed
-3 ~ +3
focusspeed -3 ~ +3 1/4
Auto focus speed
-3 ~ +3
preset_i<0~19>_
name
string[40] 1/4 The name of preset location
preset_i<0~19>_
dwelling
0 ~ 255 1/4 The dwelling time of each preset location
uart
0 ~ (m-1), m is
uart count
1/4 Select correspond uart
cameraid 0~255 1/4 Camera ID to control external PTZ cameral
isptz
<boolean>
1/4 To distinguish the video channel if mapping to a PTZ camera
disablemdonptz
<boolean>
1/4 Disable motion detection on PTZ operation
enableptztunnel
<boolean>
1/4 Enable PTZ tunnel channel to control UART