Vivotek NETWORK CAMERA IZ7151 - Manual (Page 9)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 
Internet connection with static IP
Choose this connection type if you are required to use a static IP for the Network Camera�
1
: Set up the Network Camera in a local area network�
2
:
Go to Configuration > Network > Network Type. Select LAN > Use fixed IP address.
3
: Enter the static IP, Subnet mask, Default router, Primary DNS provided by your ISP�
Internet connection via PPPoE (Point-to Point over Ethernet)
Choose this connection type if you are connected to the Internet via a DSL Line� See PPPoE on
page 28 for details�