Vivotek NETWORK CAMERA IZ7151 - Manual (Page 89)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 
protocol_rtp_mult
icast_backchann
el <boolean>
0/7 Indicate whether to support backchannel multicast
protocol_rtp_tcp <boolean>
0/7 Indicate whether to support rtp over tcp
protocol_rtp_http <boolean>
0/7 Indicate whether to support rtp over http
protocol_spush_
mjpeg
<boolean>
0/7 Indicate whether to support server push motion jpeg
protocol_snmp <boolean>
0/7 Indicate whether to support snmp
videoin_type
0, 1, 2 0/7
0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
videoin_
resolution
<a list of the
available
resolution
separates by
comma>
0/7 Available resolutions list
maxframerate
<maximum frame
rate for each
resolution>
0/7 Maximum frame rate
videoin_codec
<a list of the
available codec
types separaters
by comma>
0/7 Available codec list
videoout_codec
<a list of the
available codec
types separaters
by comma>
0/7 Available codec list
audio_aec <boolean>
0/7 Indicate whether to support acoustic echo cancellation
audio_extmic <boolean>
0/7 Indicate whether to support external microphone input
audio_linein <boolean>
0/7 Indicate whether to support external line input
audio_lineout <boolean>
0/7 Indicate whether to support line output
audio_
headphoneout
<boolean>
0/7 Indicate whether to support headphone output
audioin_codec
<a list of the
available codec
types separaters
by comma>
0/7 Available codec list
audioout_codec
<a list of the
available codec
types separaters
by comma>
0/7 Available codec list
camctrl_
httptunnel
<boolean>
0/7
Indicate whether to support the http tunnel for Network Camera
control
uart_httptunnel <boolean>
0/7 Indicate whether to support the http tunnel for uart transfer
transmission_
mode
Tx, Rx, Both 0/7
Indicate what kind of transmission mode the machine used� TX: server,
Rx: receiver box, Both: DVR?.
network_wire <boolean>
0/7 Indicate whether to support the Ethernet
network_wireless <boolean>
0/7 Indicate whether to support the wireless
wireless_
802dot11b
<boolean>
0/7 Indicate whether to support the wireless 802�11b+
wireless_
802dot11g
<boolean>
0/7 Indicate whether to support the wireless 802�11g
wireless_
encrypt_wep
<boolean>
0/7 Indicate whether to support the wireless WEP
wireless_
encrypt_wpa
<boolean>
0/7 Indicate whether to support the wireless WPA