Wolf Appliance Company SO30F/S - Manual (Page 97)

W O L F C O O K T O P V E N T I L A T I O N
97
F E A T U R E S
Classic, platinum and carbon stainless steel
finishes available on control module and top
cover—Model DD45 available in classic only
Remote-mounted control module
Internal, in-line and remote blower options
Three-speed blower control
Filter clean timer lets you know when the filter
needs cleaning
Delay-off feature automatically turns unit off
after five minutes, chimney remains up
Stainless steel filter cover with dishwasher-safe
aluminum mesh filter
LED indicators
Downdraft control kit, available as a sales
accessory for Models DD30 and DD36 (included
with Model DD45)—includes control module, top
cover, mounting brackets, RJ45 connector and
mounting hardware
UL listed to US and Canadian safety standards
W O L F D O W N D R A F T S Y S T E M S
The cooktop downdraft unit rises from the coun-
tertop to whisk away odors and smoke into the
easy-to-clean, five-layer mesh filter. The control
module and top cover are available in the exclu-
sive premium finishes of platinum or carbon
stainless steel or the standard classic stainless
steel for ease in matching your cooktop.
Wolf downdraft systems come in 30" (762),
36" (914) and 45" (1143) widths and are recom-
mended for use with Wolf framed electric
cooktops, gas cooktops and integrated modules.
IMPORTANT NOTE: Wolf downdraft ventilation
systems cannot be used with unframed electric
cooktops and are not recommended for use with
the electric grill, steamer and fryer modules.
A Pro ventilation hood is recommended for use
with Wolf dual fuel ranges, gas ranges, sealed
burner rangetops and gas rangetops. A down-
draft can be used with sealed burner rangetop
Models SRT304 and SRT366. An accessory trim
kit is necessary for this installation. Contact your
Wolf dealer for details.
C O N T R O L K I T O P T I O N S
Downdraft Systems
Model DD30I / DD30R
Classic DD30CONTROL/S
Platinum DD30CONTROL/P
Carbon DD30CONTROL/B
Model DD36I / DD36R
Classic DD36CONTROL/S
Platinum DD36CONTROL/P
Carbon DD36CONTROL/B
Control module and top cover have the
stainless steel finish. Control kits also
include mounting brackets, RJ45 connec-
tor and hardware and are ordered and
shipped as sales accessories for Models
DD30 and DD36. Control kit components
are included with Model DD45.
Model DD30
Model DD36
D O W N D R A F T S Y S T E M F E A T U R E S
Model DD36 shown
9" (229) chimney
elevation Top cover
Remote-mounted
control module
Location of
rating plate
Three-speed
blower control
Aluminum mesh
filters
M O D E L O P T I O N S
Downdraft Systems
(I) Models
500 CFM internal blower included
30" (762) Width DD30I
36" (914) Width DD36I
45" (1143) Width DD45I
(R) Models
Remote blower required
30" (762) Width DD30R
36" (914) Width DD36R
45" (1143) Width DD45R
W O L F
W A R R A N T Y
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
Stainless steel
filter covers
Model DD45
A C C E S S O R I E S
Downdraft Systems
Bracket supports for installation of
two integrated modules with
downdraft (Model DD30 only)
SRT/Downdraft trim kit for
sealed burner rangetop Models
SRT304 and SRT366
Transitions in various sizes
Accessories are available through
your Wolf dealer. To obtain local
dealer information, visit the
Showroom Locator section of our
website, wolfappliance.com.