Wayne-Dalton TORQUEMASTER 46 - Manual (Page 32)

32
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
Tools Needed:
�
Side lock
Install the side lock on the second
section of the door. Secure the lock to
the section with (4) 1/4”- 20 x 11/16”
self drilling screws. Square the lock
assembly with the door section and
align with the square hole in the vertical
track. The side lock should be spaced
in approximately 1/8” from the section
edge.
IMPORTANT: SIDE LOCkS MuST BE
REMOVED OR MADE INOPERATIVE IN
ThE uNLOCkED POSITION If AN
OPERATOR IS INSTALLED ON ThE
DOOR.
NOTE: After completing this step,
continue with Step 13 on page 16.
(4) 1/4”- 20 X 11/16”
SELf DRILLING SCREWS
Power Drill
7/16” Socket
Driver
Tape Measure
1/8”