Wayne-Dalton TORQUEMASTER 46 - Manual (Page 34)

34
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
Tools Needed:
�
Trolley Operator
OPERATOR MuST BE TESTED
AT TIME Of INSTALLATION AND
MONThLy ThEREAfTER AS
DESCRIBED IN yOuR
INSTALLATION INSTRuCTIONS
AND OWNER’S MANuAL, TO
ENSuRE ThAT DOOR SAfETy
fEATuRES fuNCTION. fAILuRE
TO TEST OR MAkE ANy
NECESSARy ADjuSTMENTS OR
REPAIRS, CAN RESuLT IN SEVERE
OR fATAL INjuRy.
1. Install operator rail 1/2” to 1-1/2”
(13 - 38 mm) above high arc of top
section of the door.
2. Mount operator to ceiling so that
1” to 1-1/2” (25 - 38 mm)
clearance is maintained between
trolley rail and top section when
door is fully open (trolley rail will
slope down towards rear).
3. Attach operator rail to suitable
mounting surface, 2 x 6 lumber
minimum.
4. Attach operator to ceiling using
perforated angle.
IMPORTANT: ANGLES MuST BE
SECuRELy ATTAChED TO SOuND
fRAMING MEMBER(S).
OPERATOR
fRAMING MEMBERS
PERfORATED ANGLE
OPERATOR
RAIL
PERfORATED
ANGLE
OPERATOR RAIL
wARNINg
SuITABLE MOuNTING
SuRfACE 2 X 6
LuMBER MINIMuM
DOOR ARM TO
OPERATOR BRACkET
hEADER