Xircom Action Systems 1500 - Manual (Page 11)

GSA Operations
Document Number: 401-364
11
External D/C Power
The Direct Current (D/C) Power Supply connector is the small, translucent plastic, arrow
shaped connector on the back panel below the A/C power input (as shown in Figure 4). The
acceptable input voltages are 10 to 14 VDC. Nonetheless, precautions must be taken to ensure
the power connections are correct.
NOTE: If the voltages stated on the panel are exceeded, then there is the
potential to harm the components connected to the case, especially the laptop.
Figure 4 External D/C Power Input