Xircom Action Systems 1500 - Manual (Page 25)

GSA Operations
Document Number: 401-364
25
• If the cartridge is centered and empty (a beeping should be heard warning that no ink
cartridge is installed), insert an ink cartridge, close the cover, and press the cartridge
button to reset the printer.
Figure 15 Printer cartridge
• If no warning beeps are heard and the carriage is stationed on the right side of the printer,
then it should be ready to print.
• If you need to change an ink cartridge, press the cartridge button on the printer to center
the carriage. Open the lid, exchange a new ink cartridge for the old one, close the lid, and
again press the cartridge button to reset the printer.
• Once the printer finishes testing the cartridge, the printer is ready to be used.
NOTE: If printing color output, be sure the color ink cartridge is installed
If printing large quantities (more than 15) of black print output (no color),
change the ink cartridge carriage to the large black ink carriage and insert a
large black ink cartridge.