Xircom Action Systems 1500 - Manual (Page 38)

GSA Operations
Document Number: 401-364
38
• Once the connection is established, click on the send folder (this is the folder
with the arrow pointing up and out of the folder). This will open the Send File
window as shown in
Figure 25 .
Figure 25 ProComm Send File
• To start the transmission, click on the file to be transferred and click OK.
• When the transmission is complete, exit ProComm by clicking on File and then
Exit.
Receiving Non-Secure Data
To receive non-secure data using ProComm and the Xircom card:
• Insert the Xircom PCMCIA card as outlined in the Non-Secure Communication
Connections section on page 31.
• Flip the NONSECURE/STU switch to the NONSECURE position.
• Click on the Comms folder on the Desktop.
• Double click on ProComm Data Terminal.
• Make sure that the third box in the ProComm Data Terminal status line reads
Modem of Xircom 10-100+56. If it does not, click on it and select Modem of
Xircom 10-100+56 from the list.