Xircom Action Systems 1500 - Manual (Page 31)

GSA Operations
Document Number: 401-364
31
Non-Secure Communication Connections
Connecting to a Phone Line for Non-Secure Connections
To connect the computer to a phone line:
• Flip the NONSECURE/STU switch to the NONSECURE position.
• Connect an RJ11 phone cable (a regular phone line) from the phone connection in the
back of the case (shown in Figure 19 ) to the phone connection desired.
Figure 19 Telephone Connection
• Take the "Y" Phone Cable and connect the single plug end to the docking bar and insert
the RJ11 plug into the RJ11 connector and the RJ45 plug into the RJ45 connector of the
Xircom card (see Figure 20).
• Insert the Xircom Card into the PCMCIA card slot of the computer (see Figure 20).
Figure 20 LAN/Modem Connections