Zebra Technologies P100iTM - Manual (Page 30)

26 P100i User’s Manual 980590-001 Rev. A
Printer Installation
Setting Printer Driver Options
10. Under the Device Settings tab, if you select Encoder Settings, a button “Properties” will
open next to the Encoder Settings. Click that Properties button, and the following screen
will appear.
Typically, the only setting that a User might change is to switch between High Coercivity
and Low Coercivity Magnetic Stripe cards. A User should leave all other settings
unchanged.
11. Once the P100i printer driver options are set to your satisfaction, click the OK button to
save your new configuration and close the Properties window.