Inserting cards – Zebra Technologies P100iTM User Manual
Page 37
Advertising
P100i Printer Setup
Inserting Cards
980590-001 Rev. A
P100i User’s Manual
33
Inserting Cards
Cards are inserted one at a time into the slot on the front of the P100i . The card is printed on
the top surface and ejected out through the same slot.
The following figure shows the encoding orientation for contact smart-cards and cards with a
magnetic stripe.
For magnetic-stripe cards, if printing is desired on the side with the magnetic stripe, the card
would be inserted stripe up, with the stripe toward the right side of the printer as viewed from
the front.
For contactless smart-cards, orientation is not a consideration.
Important •
Handle the cards only by the edges.
Advertising