Zebra Technologies P100iTM - Manual (Page 49)

980590-001 Rev. A P100i User’s Manual 45
6
Troubleshooting
Troubleshooting Procedures
LCD Panel Warnings and Error Messages
* If the problem persists, contact Technical Support; see Appendix D .
WARNING MESSAGES (printer will still operate)
Problem / Symptom Description or Cause Possible Solution *
CLEAN PRINTER Printer needs to be cleaned (this
message is displayed after 1000
cards have been printed). Clean the printer. Refer to
Chapter 5 for details on how to
clean the printer.
CHECKING RIBBON Printer is detrmining type of
ribbon installed. No action required -- status
message only.
CLEAN MAG HEAD The magnetic encoder head
needs cleaning. Use the standard cleaning card
process described in
Chapter 5 .
INVALID MAGNETIC DATA The magnetic data may be
invalid. Check data format.
REMOVE RIBBON Displayed during the printer
cleaning process described in
Chapter 5 .
Remove the ribbon.