Xerox 432 - Manual (Page 138)

Page 4-22 Xerox Document Centre 440/432/430/426/425/420 User Guide
Delayed Start
Delayed Start is mainly used to transmit faxes during off-peak
hours when telephone charges are lower or when sending to
another country/time zone.
Use Delayed Start, to transmit a document to a single
destination, or use a broadcast send or polling operation. Up to
100 delayed send jobs can be programmed at one time,
depending on the size of the documents and the available
memory. Only one delayed poll can be saved at a time. Use the
Fax Job Monitor feature to check the available memory.
NOTE: If a power outage occurs, all pending delay start jobs
will be queued to start immediately once power is restored.
¾ Load the document.
¾ Select [More Features].
¾ Select [Delayed Start].
¾ Select [ON] - the Delayed
Start screen will be displayed.
¾ Use the up/down scroll
arrows to indicate the hour
and minutes when you would
like the fax to be transmitted.
¾ Select [Save] and then
[Start].