Job interrupt, Job interrupt -25, Produ c t overview – Xerox 432 User Manual
Page 57
Xerox Document Centre 440/432/430/426/425/420 User Guide
Page 2-25
P
rodu
c
t Overview
Job Interrupt
Job Interrupt is used to temporarily suspend the current
copying/printing to allow an urgent copy job to be completed.
When using job interrupt only a limited range of features will be
available for programming.
The System Administrator can set up Job Interrupt as follows:
Interrupt on Set Boundary
the machine will finish printing the current set.
Interrupt on Page Boundary
the machine will finish printing the current page.
NOTE: Interrupt jobs cannot be promoted, released or deleted
in the Print Queue.
¾
Select [Job Interrupt]. The
indicator light will be lit.
NOTE: The Document Centre
identifies a convenient point to
interrupt the current job.
¾
Program the job.
¾
Select [Start]. The interrupt
job will be completed.
¾
Select [Job Interrupt] and
follow the screen messages
to continue the interrupted
job.
Job Interrupt button