Access fax terminal setups, Fax terminal options, Local id – Xerox 432 User Manual
Page 334: Access fax terminal setups -38
Page 11-38
Xerox Document Centre 440/432/430/426/425/420 User Guide
Access Fax Terminal Setups
Fax Terminal Options
NOTE: Only those selections relevant to the machine
configuration will be available.
Local ID
According to the Federal Law, the DC440/432/430/426/425/
420 must be programmed with an identification number. The
identification number, or Local ID, is the telephone number for
the machine.
If the identification number has not been programmed, the
DC440/432/430/426/425/420 displays a pop-up message
instructing users to enter the ID number before completing
their jobs. To ensure that this law is adhered to, the DC440/
432/430/426/425/420 will not continue until the number is
entered. Entering the Local ID number is only required on the
first occasion the machine is used.
¾
Select [Fax Terminal
Options].
¾
Select any button to change
the setting - a description of
each follows.
¾
Make changes as required.
¾
Select [Save].