Xerox 432 - Manual (Page 62)

Page 3-2 Xerox Document Centre 440/432/430/426/425/420 User Guide
Copying procedure
Before making copies on the DC440/432/430/426/425/420,
identify what is to be copied and the number of copies required.
Use the following steps to make a copy using the Document
Centre.
NOTE: If the Auditron has been enabled on the machine, an
account number may be required before programming can
commence. For account allocation, or further information
about the Auditron, please contact the Key Operator.
HINT: When programming a copy job on a network
connected machine, select Job Interrupt first. The Document
Centre will not complete any network jobs allowing the copy
job to be programmed and completed without interruption.
Refer to “Job Interrupt” on page 2-25 for more information.
1. Load the documents
A choice of document input areas is available. These are:
- A document feeder for single or multiple documents
- A document glass for single documents or bound
originals.
NOTE: A document glass cover will be fitted on the DC425
cabinet configuration.
Document Feeder
Up to 50 documents can be scanned at one time using the
document feeder. Ensure the documents are of the same size,
in good condition and all staples or paper clips removed.
Quick Pathway
¾ Load documents.
¾ Press [Features].
¾ If necessary select
[Copy].
¾ Select the Copy
features required.