Zanussi ZCM 1000X - Manual (Page 10)

10
CLEANING THE HOB BURNER PARTS
AND PAN SUPPORT
Take care not to damage the spark
electrodes. If damaged they will not light.
Please note that due to the nature of stainless
steel the pan support will tarnish through use over
a period of time. Some of this discolouration may
be removed by using proprietary cleaning agents.
Remove the burner parts carefully taking care not
to damage the spark electrodes. Clean the pan
support, burner caps and burner crowns in hot
water to which a little washing up liquid has been
added. You may use mild abrasives.
Do not wash the pan support or burner
parts in a dishwasher.
Make sure the slots in the crown are not blocked
by food or cleaning materials. If you look after the
burner crowns in this way they will stay reasonably
clean, however, the surface will dull with time.
Aluminium pans can leave shiny metal marks on
the pan supports. Reduce the marking by regularly
cleaning the pan supports and ensuring the bases
of new pans are well scrubbed to remove loose
deposits.
After cleaning the burner parts and pan
supports dry them thoroughly before replacing.
HINTS AND TIPS
·
If food spills during cooking move the pan to
another burner to finish cooking. Then the soiled
parts can be cleaned as soon as they are cool
enough and before the spill burns on.
Do not leave accidental spillage on the hob
or removable parts. The spillage should
be wiped up and the parts washed and
carefully dried as soon as the hob, pan
support and burner parts are cool enough
to touch.
·
Clean the wells of the burner body if spillage has
entered when the hob has cooled.