Zanussi ZCM 1000X - Manual (Page 16)

16
For Instructions relating to the oven please refer to the ZBM 799
Instruction Book
WARNINGS
·
This appliance must be installed by a qualified electrician/competent person (CORGI Registered).
Safety may be impaired if installation is not carried out in accordance with these instructions.
·
Before connecting the appliance make sure that the voltage of your electricity supply is the same as that
indicated on the rating plate. The rating plate can be seen by opening the oven door.
·
Do not alter the electrical circuitry of this appliance.
Warning: This appliance must be earthed.
THINGS TO NOTE
·
When fitting this appliance the recommended dimensions as shown in Fig. 1 and the instructions on ‘Location
of appliance’ must be followed.
·
Enquiries regarding the installation of the cooker point if required should be made to your Regional Electricity
Company to ensure compliance with their regulations.
·
The cooker point should be within 2m of the appliance to make it accessible to switch off the appliance in
case of an emergency.
NOTE: HOUSE CIRCUIT
Earth leakage / continuity tests must be carried out before the appliance is connected to the mains supply and
rechecked after fitting.
INSTALLATION INSTRUCTIONS