Xerox 3200MFP - Manual (Page 53)

2 Getting Started
Xerox Phaser 3200MFP 2-21
Using the Save Modes
Toner Save Mode
Toner Save mode allows your machine to use less toner on each page.
Activating this mode extends the life of the Print Cartridge beyond what one
would experience in the normal mode, but it reduces print quality.
NOTE: When PC-printing, you can also turn on or off the toner save mode in
the printer properties. For details, see Chapter 6, Printing.
Power Save Mode
Power Save mode allows your machine to reduce power consumption when it
is not in use. You can turn this mode on and select a length of time for which
the machine waits after a job is printed before it switches to a reduced power
state.
1. Press Menu until “Machine Setup” appears on top line of the display.
2. Press the scroll button ( or ) until “Power Save” appears on the bottom
line. Press Enter.
3. Press the scroll button ( or ) to display “On” on the bottom line and
press Enter.
Selecting “Off” means that the power save mode is deactivated.
4. Press the scroll button ( or ) until the time setting you want appears.
The available options are 5, 10, 15, 30, 60 and 120 (minutes).
5. Press Enter to save the selection.
6. To return to Standby mode, press Stop/Clear.