Zanussi ZUQ 875 - Manual (Page 23)

23
TO FIT THE MAIN OVEN SHELVES
The shelf should be fitted with the straight rods
uppermost on the frame and the forms towards the
back of the oven.
To remove a shelf slide the shelf towards you until the
shelf stop is reached. Tilt shelf up at the front so that
the stops clear the side supports. Lift shelf clear. To
install a shelf, reverse the above steps. Each shelf
position has an upper and lower support wire, ensure
the shelf is placed between these two support wires.
HINTS AND TIPS
• Arrange the shelves in the required positions
before switching the oven on. Shelf positions are
counted from the bottom upwards.
•
When cooking more than one dish in the oven,
place dishes centrally on different shelves rather
than cluster several dishes on one shelf, this will
allow the heat to circulate freely for the best
cooking results.
• When batch baking one type of food, e.g. Victoria
sandwich cakes, those of similar size will be
cooked in the same time.
•
It is recommended that when baking larger
quantities, the shelf positions should be evenly
spaced to suit the load being cooked. A slight
increase in cooking time may be necessary.
• Do not place baking trays directly on the oven
base as it interferes with the oven air circulation
and can lead to base burning; use the lower shelf
position.
Do not place cookware and cooking pots with
rough bases e.g. cast iron on the oven door as
damage to the glass may occur.
14
1