Yamaha TX5n - Manual (Page 42)

TX6n/5n/4n Reference Manual 42
Panel Operations
■ Editing a scene
Here’s how to edit the scene name or turn the protect setting on/off for each scene 01–49.
1.
In the HOME screen, press the right-most function button (SCENE) to access the SCENE screen.
2.
Use encoder A to select the scene number that you want to edit.
3.
Press the second function button from the right (EDIT).
The same confirmation screen as for Scene Store will appear.
Then edit the scene name or protect setting in the same way as when storing a scene, and when you are finished press the
[ENTER] button to execute your edits
(page 41) .
■ Erasing a scene (Clear)
Here’s how to clear a scene 01–49. However, you cannot clear the current scene.
1.
In the HOME screen, press the right-most function button (SCENE) to access the SCENE screen.
2.
Use encoder A to select the scene number that you want to clear.
3.
Press the right-most function button (CLEAR).
The Scene Clear confirmation screen will appear.
• If the current scene is selected, [CLEAR] will not appear because the current scene cannot be erased.
4.
Press the [ENTER] button to execute the Clear operation.
• While settings are being applied to the amplifier, the message “Do not turn off!” will be shown in the display.
Never power-off the amplifier while this message is displayed.
NOTE
CAUTION